Indoor wind testing equipment

For testing any small wind turbine at a constant wind speed I am building a small test stand with a powerful air blower.

Today I tested the motor system. A brushless motor drives a 3 bladed 36cm prop retrofitted from a large upright stand ventilator. A small adapter was turned on the lathe to mate the prop to the brushless motor. The motor is from an unused tool spindle from my CNC machine and desperately overpowered for this purpose, actively cooled at full load it takes 80A@32V. An electronic speed controller keeps the system at a constant speed. The controller takes orders via an analog input, i.e. a potentiometer or with a serial connection to a computer. An FTDI232 circuit is used to form the serial connection via USB.

The thing is pretty loud, I’ll take a short video later.

Zn3FjgSFOXI

Großartig! :slight_smile:

Wär eigl. nen klasse Beitrag für den Blog :slight_smile:

Und auch nett, mal ein Bild bzw. Viedo in einen Forumsbeitrag zu linken, das lockert die Sache auf undbring einfach mehr Spass beim lesen bzw. anschauen (besonders Deine Windmaske machte mich grinsen, @Alex).

Gruss, Oliver

Die Luftschraube ist jetzt ganz gut gewuchtet (statisch), der Rotor vom Motor ist statisch so gut es geht (Achse auf Hartmetallmesserschneiden gelagert) gewuchtet, dynamisch muss er leider auch noch gewuchtet werden, dafür müsste ich erstmal ein Wuchtgerät bauen. Die Elektronik dafür, also Accelerometer, Peizoabnehmer, MCU, DSO… hätte ich schon da. Macht vielleicht Sinn, ein größeres Wuchtgerät zu bauen, um gar VAWT Rotoren zu wuchten?